Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Production throwing
Welcome!
Welcome!
0.1 Meet Sofie (1:04)
0.2. What's the plan? (1:09)
Module 1: Preparation
1.1 Ten golden tips for production throwing (5:43)
1.2. Spiral wedging (3:44)
1.3. Throwing tools (0:57)
1.4. Trimming tools (2:07)
Module 2: A set of mugs
2.1. Centring (4:44)
2.2. Opening up (4:54)
2.3. Pulling up (6:36)
2.4. Finishing (4:42)
2.5. Setting up your measuring gauge (3:28)
2.6. Throwing continued (5:22)
2.7. Throwing a chuck (5:31)
2.8. Trimming preparation (1:51)
2.9. Trimming (3:52)
Module 3: A set of bowls
3.1. Centring and opening (3:34)
3.2. Pulling up (6:29)
3.3. Demo (6:30)
3.4. Trimming preparation (2:49)
3.5. Trimming (9:17)
Module 4: A set of breakfast bowls
4.1. Attaching a bat (6:11)
4.2. Centring (3:22)
4.3. Opening up (7:31)
4.4. Pulling up (5:15)
4.5. Setting up the measuring gauge (1:33)
4.6. Demo (8:40)
4.7. Trimming preparation (5:53)
4.8. Fixing imperfections (3:38)
4.9. Trimming (4:44)
4.10. Cutting in half (1:02)
Module 5: A set of dessert plates
5.1. Centring and opening (5:21)
5.2. Pulling up (7:37)
5.3. Demo (7:37)
5.4. Trimming preparation (7:37)
5.5. Attaching (2:40)
5.6. Trimming (11:56)
5.7. Cutting in half (2:49)
5.8. Letting it dry (1:50)
Module 6: A set of large plates
6.1 Attaching the bat (1:50)
6.2. Centring and opening up (6:42)
6.3. Cutting off clay and finishing (4:38)
6.4. Demo (4:38)
6.5. Trimming preparation (1:54)
6.6. Trimming (1:54)
Module 7: A set of deep plates
7.1. Centring and opening up (4:26)
7.2. Pulling up (4:55)
7.3. Demo (5:36)
7.4. Trimming preparation (4:18)
7.5. Trimming (6:41)
Module 8: A set of espresso cups of the hump
8.1. Centring (4:18)
8.2. Throwing off the hump (7:16)
8.3. Removing from the hump (1:39)
8.4. Demo (5:31)
8.5. On the chuck (3:29)
8.6. Trimming (6:13)
Module 9: In conclusion
9.1 Loading up the kiln (6:13)
9.2 Plates in the kiln (2:16)
9.3. Handles (2:19)
9.4 Final thoughts
Questions and answers
Questions and answers
Questions and answers on Production throwing
Questions and answers on Production throwing
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock